Upon opening the table box, you will find three individual boxes – the first containing the tabletop (A), the second, the table stem (B), and the third, the table base (C). Inside the table base box, you will find a small bag containing two screws. These two screws consist of a double-sided screw (D) and a bolt (E) and are used to hold the table together.

Begin assembling the table by placing the table stem (B) onto the center hole of the table base (C). Then insert the bolt (E) underneath and through the hole located in the center of the table base (C) and screw the bolt into the bottom of the table stem. Tighten the bolt by hand, then using a socket wrench with a 20 cm (or 21 cm) socket and extender, screw the two pieces together until tightly secured.

Next, screw one side of the double-sided screw (D) halfway into the bracket hole located underneath the tabletop. Then, turn the top over (tabletop up) and center the table over the stem. Insert the extended part of the double-sided screw into the hole located in the table stem. Begin turning the tabletop clockwise. The top should begin to screw onto the table stem. Once the top no longer turns, the table top is secure. The goal is to distribute the double-sided screw evenly between the table top and the stem. Be careful not to over-tighten the tabletop to the table stem.